Add new comment

Ajay kumar

Thu, 11/15/2018 - 15:37

Permalink

I purchased one CRI Submersible pump of 1.5 HP(19 stage) in May 2017. In starting months it was working good but from last few months its Trip in high current ( 30 amp). Pump taken out and trial taken out side in a drum full of water and took 9 amps only. Again it put back in the boring and started and found trip again taking high current. Same taken out from water and send to service center and found nothing wrong with pump. Now advise came that during starting, hold the green start push button for 5 to 10 second. This way pump start even after every two trips.

Please look in to this mater as this is not good condition for any pump to take high current and trip two to three times during every start.

The content of this field is kept private and will not be shown publicly.
  • Rate and add your experience with the company and its customer service.
  • Do not post sensitive data like your bank details or credit card numbers here.
  • This website is moderated, inappropriate and off topic comments are removed.
CAPTCHA
Solve this simple math problem and enter the result. E.g. for 1+3, enter 4.